IRFR4620TRLPBF is an Infineon 200V N-channel power MOSFET. Do not select it using only 200V, 24A and TO-252; establish gate drive and cooling first. Use the manufacturer name Infineon consistently in the formal BOM and quotation.

1. Keep specifications with their conditions

Infineon lists DPAK/TO-252, a 200V drain-source rating, maximum 78mΩ on-resistance at 10V gate drive and a 3–5V threshold range. The 24A and 144W headline ratings depend on thermal conditions; they are not arbitrary-board continuous capabilities.

Threshold describes the onset of a specified small current, not full enhancement. Without the relevant on-resistance guarantee at 3.3V or 5V, do not advertise direct MCU drive based on threshold alone.

2. Estimate conduction loss at a realistic load

For a screening calculation, P=I²R gives 1.95W at 5A using 78mΩ, and 7.8W at 10A. This uses an assumed resistance value, excludes switching loss and temperature dependence, and is not a board rating.

Cooling can therefore dominate well below the 24A headline. Engineering review needs the current waveform, duty cycle, gate voltage, ambient conditions and copper area. A large published power rating does not remove the need for a thermal design.

3. Review the driver for switching applications

A MOSFET gate is not a zero-load logic input. The driver must charge and discharge it within the required switching interval. Review the Miller interval, ringing, gate resistance and measured waveforms. Static on-resistance alone cannot establish high-frequency total loss.

Under safe test conditions, measure gate-source voltage, drain-source voltage and current to distinguish conduction, switching and abnormal operation. Linear operation or startup limiting additionally needs a safe-operating-area and pulse review. A switching current rating does not establish linear current-source capability.

4. Equal TO-252 appearance is insufficient

Retain IRFR4620TRLPBF and compare the pinout, tab electrical connection, package drawing and tape orientation. Similar packages can hide differences in drive requirements, dynamic behavior and safe operating limits.

If an offer proposes a similar voltage rating or lower resistance, request a complete engineering comparison. Qualify samples on the production board with the intended driver, recording temperature, load transients and switching waveforms. “Better parameters” is not a substitution decision.

5. Send a complete RFQ

Exact code ___; quantity ___; switching or linear use ___; bus voltage and transients ___; continuous/peak current ___; gate voltage ___; frequency/duty ___; DPAK and packing requirements ___; date/lot ___; destination and required arrival ___.

Factory packing information does not verify an offered quantity. Confirm actual quantity and shipment documents in the quotation. Source claims require evidence from the real supply transaction.

Frequently asked questions

Is direct 3.3V MCU drive automatically suitable? Threshold voltage alone cannot establish that.

Can 24A and 144W be used together on an ordinary small board? Return to the manufacturer’s conditions and actual board cooling.

Product lookup and enquiry

View IRFR4620TRLPBF product details and request a quote. Include quantity, application and the operating conditions above. Price, stock, delivery, lot and document availability require confirmation per order.

Manufacturer references

Manufacturer product reference 1. Reviewed November 17, 2026. This guide does not replace design qualification or guarantee inventory or authenticity.